Table of Contents
Advertisement
5.1 Connecting the Cables
Note: If you wish to link to the NB8WVPN wirelessly at the outset, see 3. Establishing a Wireless Connection below.
The NB8WVPN can be connected via an Ethernet cable.
To connect to your ADSL Router, you need to have either an Ethernet Port present on your Computer/Notebook.
Connecting your NB8WVPN ADSL Modem via ETHERNET
1.
Connect your NB8WVPN to either a computer directly or a network hub or switch using CAT5 ethernet cables.
2.
Connect the power pack to the ADSL Router and switch on the power button.
Ensure that there is a LAN link light on the NB8WVPN.
3.
4.
Ensure that the computer you intend to use has an IP address in the same subnet as the NB8WVPN
ADSL Router. (e.g. the NB8WVPN's default IP is 192.168.1.1 - your computer should be on
192.168.1.100 or similar.) If you have DHCP enabled on your computer, the NB8WVPN will assign your
computer a suitable IP address.
5.
Ensure that your computer has a LAN link light.
Connect one end of the ADSL phone line to the NB8WVPN ADSL Router and the other end to the
6.
wall socket.
YML8WVPN
8WVPN
www.netcomm.com.au
ADSL2+ VPN Router
NB8WVPN
*Image may differ from product
NB8WVPN User Guide
NB8WVPN User Guide
NB8WVPN User Guide
NB8WVPN User Guide
1
Advertisement
Table of Contents
