NetComm NB8WVPN User Manual page 73

VPN / IPSec Setup
You can add, edit or remove IPSec tunnel mode connections from this page.
By clicking Add New Connection, you can add a new IPSec termination rule.
IPSec Connection Name
Remote IPSec Gateway Address
(IP or Domain Name)
Tunnel access from local IP addresses
IP Address for VPN
Tunnel access from remote IP addresses
IP Address for VPN
YML8WVPN 8WVPN
www.netcomm.com.au
User-defined label
The IP address of remote tunnel Gateway, and you can use numeric address and domain name
It chooses methods that specify the acceptable host IP on the local side. It has single and
subnet.
If you choose "single", please entry the host IP address for VPN. If you choose "subnet", please
entry the subnet information for VPN.
It chooses methods that specify the acceptable host IP on the remote side. It has single and
subnet.
If you choose "single", please entry the host IP address for VPN. If you choose "subnet", please
entry the subnet information for VPN.
ADSL2+ VPN Router
NB8WVPN User Guide NB8WVPN User Guide NB8WVPN User Guide NB8WVPN User Guide