Konica Minolta 7075 User Manual page 109

Basic Operations
Interrupt Mode (continued)
2 Remove any document from the platen glass or from the document feeder, if present.
3 Place new original(s) on the platen glass or in the document feeder.
4 The copying settings in Interrupt mode are as follows.
Copy Mode
RADF
AES
Lens Mode
APS
Print Quantity
Finisher
Select other copying features that are compatible with the Interrupt mode, if desired.
5 Press [ ].
START
6 When Interrupt copying is completed, press [
settings of the initial job.
7 Replace the initial original, then press [
NOTES:
1 In Reserve mode, pressing [INTERRUPT] before the copier finishes scanning originals of the
reserve job will clear the settings selected for reserve job.
2 When [CHECK] is pressed during Interrupt Copying, the information displayed reflects the initial
copy job settings. Check mode will not display Interrupt copy job information.
: 1s1
: ON
: ON
: 1:1 (1.00)
: ON
: 1
: ON
START
] again to return to the
INTERRUPT
] to resume copying.
Basic Operations 6-39