Tcp/Ip Settings; E-Mail Tx (Smtp) - Konica Minolta bizhub C353 User Manual

Setup items by operation
2.34.1

TCP/IP Settings

% Specify settings to use this machine in a TCP/IP network environment.
!
Detail
For details, refer to "Specifying general settings for TCP/IP-based communication" on page 2-3.
2.34.2

E-mail TX (SMTP)

1
In Administrator mode of PageScope Web Connection, select the Network tab.
2
Select "E-mail Setting".
3
Select "E-mail TX (SMTP)".
4
Specify the following settings.
Item
E-mail TX Setting
Total Counter Notifica-
tion
SMTP Server Address
Port Number
Connection Timeout
Max Mail Size
Server Capacity
Admin. E-mail Address
Binary Division
Divided Mail Size
bizhub C203/C253/C353
Definition
Select "ON".
Select "ON".
Specify the SMTP server address. (Format: "***.***.***.***",
Range for ***: 0 to 255)
If the DNS server is specified, the address can be specified
using the host name.
This item can also be specified with IPv6.
Default setting: 25
Specify the port number.
Specify the time period before the server connection times
out.
Select whether to limit the size of sent messages.
To limit the maximum mail size, specify the max. allowance
of the mail size including the attached file.
Mails exceeding the maximum allowance are removed.
If a mail is separated, this setting is disabled.
Displays the administrator address.
If the administrator address is not specified, specify it at
"Machine Setting".
To divide the mail size, select "ON".
If the mail software used for receiving mails does not have
the mail restore function, the mails may not be read.
To divide the mail, specify a divided mail size.
2
Prior confirmation
Address of the server
Port number for the serv-
er
Receiving limit of the
server
Address for the adminis-
trator
Restore function of the
mail soft
Receiving limit of the
server
2-119