Konica Minolta bizhub C353 User Manual page 199

Setup items by operation
Item
[New Registration]
Search from Number
Search from Index
No.
Function
Name
S/MIME
[Edit]
[Delete]
When "E-mail" was selected using [New Registration]
Item
No.
Name
Index
E-mail Address
Registration of Certifica-
tion Information
Limiting Access to Desti-
nations
When "FTP" was selected using [New Registration]
Item
No.
Name
Index
Host Address
File Path
User ID
Password
anonymous
PASV Mode
Proxy
Port Number
Limiting Access to Desti-
nations
bizhub C203/C253/C353
Definition
Registers a new destination in the address book.
Select a range of registration numbers, and then click [Go] to display the list of destina-
tions of the selected number.
Select the search text, and then click [Go] to display the list of destinations of the selected
texts.
Displays the registration number.
Displays functions for which addresses were registered.
Displays registered names.
Shows whether or not a certificate is attached to the E-mail destination.
Edits the registered address. The settings are the same as ones available during registra-
tion.
Deletes the address from the address book.
Definition
Specify the registration number ("Use opening number" or "Direct Input").
Type in the address name (up to 24 characters).
Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Enter the address for the destination (up to 320 characters).
Select this check box to register certificate information.
Select the "Registration of Certification Information" check box. Click [Browse...], and
then specify the certificate information. Only files in the DER (Distinguished Encoding
Rules) format are supported for certificate information. To delete the certificate informa-
tion, select "Deletion of Certification Information".
If the E-Mail address to be registered does not match the E-Mail address of the certificate,
the certificate cannot be registered. Confirm whether both E-Mail addresses match, and
then register the certificate.
Specify the group that is allowed to access a destination and reference allowed level.
Definition
Specify the registration number ("Use opening number" or "Direct Input").
Type in the address name (up to 24 characters).
Specify the index characters for the destination. To normally display the destination in the
control panel, select the "Main" check box.
Specify the IP address of the FTP server of the destination.
If the DNS server is specified, the address can be specified using the host name.
Specify the directory of the destination (up to 96 characters).
Type in the user ID for logging in to the FTP server of the destination (up to 47 characters).
Type in the password for logging in to the FTP server of the destination (up to 31 charac-
ters).
Specify whether even an anonymous user can access the destination.
Register whether to make communication in the PASV mode.
Specifies whether or not a proxy server is used.
Specify the port number to be used.
Specify the group that is allowed to access a destination and reference allowed level.
2
2-183