Setup items by operation
For Remote Printer mode with NetWare 4.x bindery emulation
0
Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
1
From a client computer, log in to NetWare with the Administrator permission as Bindery.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup".
4
Press the [Enter] key.
5
Enter the appropriate names in the "Print Server Name", "Printer Name", and "Print Queue Name"
fields.
6
Select "Other/Unknown" from the "Printer type" field.
7
Save the specified settings.
8
Press the [Esc] key to quit Pconsole.
9
Use the NetWare server console to load PSERVER.NLM.
10
Specify the following settings for "NetWare Setting".
Item
IPX Setting*
Ethernet Frame Type*
NetWare Print Mode*
Print Server Name*
Printer Number*
For the print server mode with NetWare 4.x bindery emulation
0
Before using bindery emulation, check that bindery emulation is compatible with the NetWare server.
0
To use the printer server mode, the IPX protocol must be loaded on the NetWare server.
1
From a client computer, log in to NetWare with the Administrator permission as Bindery.
2
Start up Pconsole.
3
From the "Available Options" list, select "Quick Setup".
4
Press the [Enter] key.
5
Enter the appropriate names in the "Print Server Name", "Printer Name", and "Print Queue Name"
fields.
6
Select "Other/Unknown" from the "Printer type" field.
7
Save the specified settings.
8
Press the [Esc] key to quit Pconsole.
9
Specify the following settings for "NetWare Setting".
bizhub C203/C253/C353
Definition
Select "ON".
Specify the frame type to be used.
Select "NPrinter/Rprinter".
Specify the printer server name to allow it to serve as Nprint-
er/Rprinter (up to 63 characters).
Enter the Nprinter/Rprinter printer number.
2
Prior confirmation
Frame type
Print server name regis-
tered in step 4
2-91