Setup items by operation
2.9.5
POP before SMTP
POP before SMTP
1
In Administrator mode of PageScope Web Connection, select the Network tab.
2
Select "E-mail Setting".
3
Select "E-mail TX (SMTP)".
4
Specify the following settings.
Item
POP before SMTP
!
Detail
If the POP server is different from the SMTP server, the POP server informs the SMTP server that it has
been logged in. Therefore, if the set POP before SMTP time is too short, messages may not be sent.
E-mail RX (POP)
1
In Administrator mode of PageScope Web Connection, select the Network tab.
2
Select "E-mail Setting".
3
Select "E-mail RX (POP)".
bizhub C203/C253/C353
Definition
To perform POP before SMTP, select "ON".
Prior confirmation
Whether the sever requires POP before
SMTP authentication
2
2-35