Management Support Function - Konica Minolta BIZHUB 920 Software Manual

6.1.4.

Management Support Function

The management function provides the following a group of security functions.
Function title
MNG.MODE MNG.MODE permits only the administrator
Setting of to execute only the administrator the check
security function of TOE password length, the HDD
reinforcement identification and authentication function,
mode the record function of audit information, the
function that validates identification and
authentication, and the function that stops
their functions.
MNG.ADM MNG.ADM permits only the administrator
Management to execute the following operations.
support
function - Creation of User BOX, registration of User
(Administrator) BOX identifier, and setting of User BOX
password
- Inquiry of audit information (No the
deletion function of audit information)
For the User BOX password entered by the
administrator, the permitted value is valid-
ated according to the following rules.
- Password of 8 to 64 characters
- Password of English characters, one-byte
capital letters, small letters, and numerals
- Prohibition of the same password with that
used one generation ago
In the validation of permitted value, the
administrator is registered if the rules are
obeyed, and it is rejected if not so.
The inquiry of audit information has the
information for the date and time
Copyright© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved
Specification of security function
TOE security functional
FMT_MOF.1
FPT_RVM.1
FDP_ACC.1[2]
FDP_ACF.1[2]
FIA_SOS.1[1]
FMT_MSA.1
FMT_MSA.3
FAU_STG.1
FAU_SAR.2
FAU_SAR.1
FMT_SMF.1
FMT_SMR.1
FPT_RVM.1
64
requirement