St Introduction; St Identification; St Identification And Management; Toe Identification And Management - Konica Minolta BIZHUB 920 Software Manual

1. ST Introduction

1.1.

ST Identification

1.1.1.

ST Identification and Management

Title：
Version：
Created on：
Created by：
1.1.2.

TOE Identification and Management

Title：
Version：
Created by：
"bizhub PRO 920 zentai seigyo software" for Japan is the same product as "bizhub PRO 920
control software" for overseas, with different calling name. It is called bizhub PRO 920 control
software, hereafter.
1.1.3.

Used CC Version

CC Version 2.1, ISO/IEC 15408:1999, JIS X 5070:2000
CCIMB Interpretation-0407
Copyright© 2005 KONICA MINOLTA BUSINESS TECHNOLOGIES, INC., All Rights Reserved
Multi functional printer (digital copier) bizhub 920 / bizhub PRO 920
Security Target
6
June 10, 2005
Konica Minolta Business Technologies, Inc.
Japan : bizhub PRO 920 zentai seigyo software
・This software consists of two components below.
Gazou seigyo program (Gazou seigyo I1)
Controller seigyo program (IP control P)
Overseas : bizhub PRO 920 control software
・This software consists of two components below.
Image control program (Image control I1)
Controller control program (IP control P)
Note）"Image control program" and "Controller control program" for
overseas are the same products as "Gazou seigyo program" and
"Controller seigyo program" for Japan respectively, with
different calling names.
Image control program (Image control I1)
Controller control program (IP controller P)
Konica Minolta Business Technologies, Inc.
7
: 10-0000
: 10-0000