Operation
1. Open the front and right doors. Refer to section
2. Set the main breakers 1 and 2 to the off position:
a. Set the main breakers from the
b. Set the main breakers from the
3. Energize the EVSE. Refer to section
4. Close the doors. Refer to section
5. Wait four hours.
The internal heater of the cabinet heats the inside of the cabinet and lets the
condensation evaporate.
6. Open the front and right doors. Refer to section
7. Set the main breakers 1 and 2 to the on position.
a. Set the main breakers from the
b. Set the main breakers from the
8. Close the doors. Refer to section
4.8
Maintenance and cleaning
4.8.1
Maintenance schedule
Task
Clean the cabinet.
Do a check for damage on
the EV charge cables and
the connectors.
Do a check for damage on
the cabinet.
Replace the filters for the air
inlets.
Make sure that the manufac-
turer does maintenance on
the EVSE.
Replace the filters for the air
outlets.
4.8.2
Clean the cabinet
Preliminary requirements
26
Frequency
4 months
3 months
6 months
1 year
1 year
After the first year, then 2
years
•
Cleaning agent. Refer to section
•
Non-abrasive tool. Refer to section
Danger:
Hazardous voltage
•
Do not apply high-pressure water jets. Water can leak into the cabinet.
6.1
.
Auto to the Manual position.
Manual to the Off position.
4.5
.
6.2
.
6.1
.
Off to the Manual position.
Manual to the Auto position.
6.2
.
Procedure
Refer to section
Refer to section
Refer to section
Refer to section
Ask the manufacturer to do
the task. Refer to section
1.12
For the complete mainte-
nance schedule refer to sec-
tion
For the required spare parts
refer to section
Refer to section
7.5
.
7.5
.
4.8.2
.
4.8.3
.
4.8.3
.
4.8.4
.
.
7.3
.
7.4
.
4.8.5
.
BCM.S1101.0-EN | 001