Kodak SRP 30 Operator's Manual page 297

Operator's Guide
7. Remove the guide grids and clean with water and a lint-free cloth to remove all
chemical deposits (crystalline sheet bridge deposits).
8. Carefully mount the guide grids.
9. Mount the bracket with the feed roller set on the rack.
10. Check the smooth movement of the rack by turning the handle. (See No. 4 in the
figure on the previous page.)
11. Push the dryer rack in the dryer cabinet and fasten it with the knurled screw.
12. Reinstall the cover. Rotate the lock 90°, and push it in and up to the locking
position.
8-44 KODAK PROFESSIONAL SRP 30 Laser Printer