Kodak SRP 30 Operator's Manual page 284

CAUTION:
7. Remove the dust with compressed air and a spray tube.
8. If the filters are very dirty, clean them carefully with an optical cloth or with optic
pads.
After cleaning the filters:
9. Reinstall the filter cover.
10. Release the black lever holding the lamp opening mechanism.
11. Attach the lamp house cover to the metal bracket and close the cover.
12. Start up the printer (press the ON key on the scanner).
KODAK PROFESSIONAL SRP 30 Laser Printer
When cleaning the very thin and highly fragile glasses of the
exposure filters (1), support them carefully from below so that
they do not break.
To avoid fingerprints, do NOT touch the filter glasses with your
bare hands.
Maintenance
8-31