Autoprint Print Mode - Kodak SRP 30 Operator's Manual

Autoprint Print Mode

Use this print mode to print images from film.
1. Touch:
Print mode
Autoprint
2. Touch the Configuration button and select an order configuration from the list
or
Touch Change configuration and change the settings of the currently selected
order configuration.
NOTE:
3. Touch Change order no.? if you want to enter a new order number (and if the
Order no. parameter in Settings / Machine settings / Other is set to Manual).
4. Enable or disable Preview.
5. To begin the printing process, insert the film strip into the film feeder, emulsion
side down.
If Preview is enabled, the Preview screen appears. Go to Step 6.
If Preview is disabled, the order begins to process and the status is displayed at
the bottom of the screen. Go to Step 10.
NOTE:
KODAK PROFESSIONAL SRP 30 Laser Printer
To view details of the current configuration, touch Show Configuration.
It is not possible to switch to Autoprint with Preview while an order is
processing.
Production
6-19