Kodak SRP 30 Operator's Manual page 175

Operator's Guide
3. Insert the four fingers of the paper guides into the notches that correspond to the
paper width. (The notches are labeled in millimeters). Check that all four fingers
are seated in the correct notch.
NOTE: The shape of the notches makes it easier to align the fingers with the correct
4. Loosen the screws of the magazine exit guides.
5. Set the magazine exit guides to the width of the paper. Align the guides with the
line indicators (labeled in millimeters).
6-4
position.
KODAK PROFESSIONAL SRP 30 Laser Printer