Kodak SRP 30 Operator's Manual page 121

Operator's Guide
PDM: Defines the computer (server) on which the d-Bridge software is installed
(required for network orders):
NOTE: For Remote order: File print or Autosave:
4-46
PDM address or name: Enter a name or IP address.
PDM Port no.: Use pfdfcom, if the corresponding input in the SERVICES
file exists.
Access to the indicated drive or directory of the external computer must be
possible without restrictions (no password protection).
Explanation:
PFDF (Photofinishing Data Format) is a standardized format for order data to
be used in networks.
d-Bridge is a software program to manage the order files. The software
saves digital orders (images and PFDF information) until they are called by a
receiving station (for example, the SRP 30 Laser Printer).
In network connections with several input devices, install the d-Bridge
software on a computer that is only responsible for this task (prerequisites:
32-Bit WINDOWS-based computer running WINDOWS 2000, at least 700
MHz, at least 128 MB RAM, at least 20 GByte hard disk).
KODAK PROFESSIONAL SRP 30 Laser Printer