Kodak SRP 30 Operator's Manual page 200

CAUTION:
11. When the complete order has finished, touch End of order.
A manual end of order is always required for Manual Positioning because several
film strips and film pieces can be combined to form an order, and the system
cannot automatically determine which is the last one.
KODAK PROFESSIONAL SRP 30 Laser Printer
If the printer is reset with a film piece (one or two frames)
inserted in the film mask, the film piece might not be in a
position for safe removal when the reset is complete. If you then
remove the film mask, you risk damaging the film.
Before initiating a manual reset, touch the Eject button and
let the film piece move to a position in which you can safely
pull out the film mask.
If the printer resets automatically (when an error occurs, for
example), DO NOT pull out the film mask. After the reset is
complete, remove the lamp box. Then, with the film mask
still in place, carefully remove the film piece.
Production
6-29