Kodak SRP 30 Operator's Manual page 134

4. Touch the appropriate buttons to enter corrections on a scale of -9 to +9 for:
Yellow, Magenta, Cyan, and Density
Area contrast (ACT)
Detail contrast (DCT)
Sharpn. edges (SHP)
Saturation (SAT)
5. Touch Save as if you are creating a new configuration, and enter a name.
Touch Save to save changes to an existing configuration.
Touch Cancel to return to the previous screen without saving.
These corrections appear in the back print if back print text was selected. See Back
Print Configurations / Additional Information Regarding Certain Parameters on Page
4-54.
KODAK PROFESSIONAL SRP 30 Laser Printer
Settings
4-59