Kodak SRP 30 Operator's Manual page 195

Operator's Guide
For APS films, the system checks to see if a list already exists for the entered
film identification number (FID):
If not, the list is saved.
If a list already exists, a pop-up window offers the Overwrite and Cancel
functions.
7. To begin the printing process, insert the film strip into the film feeder, emulsion
side down. All important data for the order is shown on the screen.
If Preview is enabled, the Preview screen appears. Go to Step 8.
If Preview is disabled, the order begins to process and the status is displayed at
the bottom of the screen. Go to Step 12.
NOTE: It is not possible to switch to Reorder with Preview while an order is
6-24
processing.
KODAK PROFESSIONAL SRP 30 Laser Printer