12 BRAKE SYSTEM
12.6
84
F03694-10
Checking that the brake linings of the front brake are secured
Warning
Danger of accidents Worn-out brake linings reduce the braking effect.
–
Ensure that worn-out brake linings are replaced immediately. (Your authorized KTM workshop will be
glad to help.)
S05375-10
Main work
–
Move the brake fluid reservoir mounted on the handlebar to a
horizontal position.
–
1
Remove screws
.
–
2
Take off cover
with membrane
–
A
Add brake fluid to level
Guideline
A
Level
(brake fluid level
below reservoir rim)
Brake fluid DOT 4 / DOT 5.1 (
–
2
Position cover
with membrane
1
screws
.
Info
Use water to immediately clean up any brake fluid that
has overflowed or spilled.
–
Check the brake linings for lining thickness
A
Minimum thickness
»
If it is less than the minimum thickness:
–
Change the brake linings of the front brake.
(
p. 85)
–
Check the brake linings for damage and cracking.
»
If there is damage or cracking:
–
Change the brake linings of the front brake.
(
p. 85)
–
Check that the brake linings are secured.
»
If the brake linings are not secured correctly:
–
Secure brake linings, replace with new parts if neces-
sary.
3
.
.
5 mm (0.2 in)
p. 138)
3
. Mount and tighten
A
.
≥ 1 mm (≥ 0.04 in)