Sony MZ-N920 Operating Instructions Manual page 77

Portable mini disc recorder
Hide thumbs Also See for MZ-N920:
Table of Contents

Advertisement

Machine Translated by Google
Symptoms
Even though the "REC-
Posi" setting is "From
Here", recording starts
from the end of the disc.
The "REC-Posi" setting
cannot be set to "From
Here".
I can't record.
Recording stops on the way.
While recording in monaural,
you can hear it in stereo from
the headphone.
Momentary noise is generated
during recording.
The lid does not open after
recording.
Cause
The group recording (" : REC") setting is
set to always be a group (" : REC ON").
The group recording (" : REC") setting is
set to " : REC ON".
Not properly connected to the sound source. Please reconnect ( pages 21 and 36).
There is no digital output from the portable
CD player.
A connection cord with a resistor is used
(during analog input recording).
The recording level is too low (during manual
tuning). The power was unplugged or there was
a power outage during recording.
Contains a play-only disc. Replace it with a recording disc
The remaining time of the disc is 12 seconds or less, and it has been replaced with
another recording disc ("DISC FULL" is displayed.
I tried to overwrite the disc containing the
songs transferred from my computer.
(Songs transferred from a computer
cannot be overwritten. Recording will end
automatically.)
During digital recording, you can hear it in
stereo through headphones. (The recorded
sound will be monaural.)
In LP4 stereo recording, due to the characteristics of
the compression method, momentary noise is
generated very rarely depending on the sound source
of the recording source.
After recording , do not open the lid until
the "TOC Edit" display disappears.
measures
Set ": REC" in the menu to " : REC
OFF" (page 35).
Set ": REC" in the menu to " : REC OFF",
and then
Set "REC-Posi" to "From Here".
Connect a portable CD player to a household
power supply and have a skip guard function
Please turn off (ESP, etc.).
Use a connection cord that does not
contain resistance.
Adjust the recording level (page 31).
The contents of the recording up to that
point have disappeared. Please re-record
from the beginning.
when.
Please return the transferred song to your
computer before recording. Start recording
from the end of the disc without overwriting.
— —
Do stereo recording or LP2 stereo recording.
— —
Trouble
Tsu
Tokih
77 77

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents