Tv Or Radio (Analog Recording) - Sony MZ-N920 Operating Instructions Manual

Machine Translated by Google
z
If there is no sound for about 3 seconds at the recording source
during synchronized recording, the unit automatically pauses
recording. When the sound is detected again, it returns to the
synchronized recording. Recording will stop automatically if the
recording is paused for more than 5 minutes .
please note
• During synchronized recording, you cannot manually pause
or cancel the pause. • Do not switch the "SYNC REC" setting
during recording. It may not be recorded correctly.
• Even if the recording source continues to be silent (page 92)
during synchronized recording, the recording may not be
automatically paused due to the noise of the recording source.
• If there is no sound (page 92) for about 2 seconds in the same song from
the recording source during synchronized recording from a source other
than a CD or MD, the song number will increase by one when the sound
comes out again .
36
Record from TV or radio
(analog recording)
When recording from "analog devices" such as
cassette tapes, radios, and televisions,
This is the method for recording from MD.
To LINE OUT terminal, etc.
L (white)
Optional connection code
RK-G129 etc.
REC
1 Connect.
Use the connection code (sold separately)
according to the recording source device. For
details, see "Accessories sold separately" (page
74) and "You can also do this" (page 87) .
2 Hold down the REC knob and slide it to start recording.
3 Make the sound you want to record.
TV, radio cassette player,
etc.
R (red)
LINE IN
To (OPT)