Sony MZ-N920 Operating Instructions Manual page 50

Machine Translated by Google
Number of characters that can be entered on one disc • For
alphanumericals / symbols only: Approximately 120 titles with
approximately 10 characters (maximum approximately 1700
characters)
• For kana characters only: Approximately
60 titles with about 10 characters (maximum approximately
800 characters) The number of titles that can be registered
varies depending on the number of characters.
About the character palette
On the main unit, select and enter characters from
the character palette that appears in the display
window. The character array of the character pallet
is as follows.
Input area
The cursor flashes.
Character palette
As you can see, only a part of the character
palette is displayed in the display window, so
move the cursor with the central control key to
select a character.
please note
• Please note that if you put "//" between characters
such as "abc // def" in the disk name or group
name, you may not be able to use the group
function. • You can display Chinese characters
with the attached remote control, but you can not
name them in Chinese characters . You can enter
Chinese characters using the included SonicStage
50
software .
Give a name
You can name it while playing, recording, or
stopped. However, when naming a song while it
is stopped, make sure to select the song you
want to name. When naming a group, make sure
to select a song in the group you want to name
while playing, recording, or stopping.
x x
Jog Liver
(.,>, ENT)
1 Select "EDIT"-"Name" from the menu operation .
2 Select the next display.
Name to give
Song title
group name
Disk name
3VOL +, – Turn the knob to select a character
Then press the jog lever to decide. The
selected character lights up to confirm. The
cursor blinks at the next character position you
have determined.
The cursor flashes at the next position.
VOL +, – Knob
DISPLAY
P MODE /
+, –
display
Track Name
GroupName
Disc Name