Sony MZ-N920 Operating Instructions Manual page 34

Machine Translated by Google
Record in a group
The group function
is a disc that has been set as a group,
and you can use the "group function".
This is a convenient function when
recording several CDs on a single disc in
MDLP (LP2 / LP4) mode, or when playing
back a disc recorded by collecting single CDs.
What is a grouped disk? It means that
multiple recorded songs are grouped
into several groups on one disc as shown
in the following figure.
Before group setting
disk
Song number
3 1 2 4 5 6 7 8 12 131 415
m
Disk after group
setting
Group 1
1 2345 6 7 1 2345 1 2 3
Songs that are not in the group are considered to
belong to "Group ---" .
You can create up to 99 groups on a
single disc .
please note
If the total number of song titles and disc names on a single
disc exceeds the maximum number of characters that can be
input to this unit, group settings cannot be made. 34
1st to 5th songs in "Group 1" 8th
to 12th songs in "Group 2" 13th to
15th songs in "Group 3" 6th and 7th
songs cannot be included in the group
Group 2 Group 3
END SEARCH
REC
Create a new group and
record
Add a new group to the end of the disc
and record.
1 Press END SEARCH while stopped .
2 Hold down GROUP and hold down the REC knob
Hold down and shift.
3 Start playing the recording device.
A new group is added at the end of
the disk.
Press x to stop
recording . When you
stop recording, it will be recorded as one
group .
To always record in a group when recording
This setting enables group recording by
simply pressing END SEARCH and moving
the REC knob to the right while the next
recording is stopped. This is convenient when
recording multiple CDs for each album in
succession, such as for MDLP recording . It
can be operated only on the main unit.
1 While stopped, select "REC SET"-" :
REC" from the menu operation.
2 Select " : REC ON".
Centralized control
key (. >)
Jog dial
GROUP