Sony MZ-N920 Operating Instructions Manual page 23

Machine Translated by Google
If you cannot start recording • Check the hold
(malfunction prevention) switch . (Pages 14 and 19). • Check the disc
erasure prevention knob.
Please. (Page 73).
• Play-only discs cannot be recorded.
Checking the recording status
The REC lamp lights up or flashes to inform you of the recording
status. Recording status During recording
Recording pause
When the recording disc has
less than 3 minutes left
When a track mark (song
number ) is added *
When transferring songs
* Except when adding a track mark manually or when
adding it with the auto time mark function (page 32) .
display
Lit
Blinks according to the strength
of the sound during microphone
recording (voice mirror) Blinks
Flashing slowly
Turns off for a moment
Flashes fast
please note
• When recording, we recommend connecting the AC power adapter
directly to the main unit. When recording with the main unit placed
on the charging stand, insert a fully charged rechargeable battery
into the main unit for recording so that recording can be continued
even if the main unit is removed from the charging stand.
• While the "TOC Edit" display is blinking, the recorded information
(start / end position of the song, etc.) is recorded on the disc. If
you give a shock or unplug the power, the recorded content will
not be recorded. • If the battery is removed, the AC power
adapter is removed, or the battery is exhausted during recording
or editing, or before the "TOC Edit " display disappears after
pressing the x button , turn on the power next. The lid will not
open until you insert it. • When recording from a portable CD
player
Kiha
— Some portable CD players cannot output light without an AC
power adapter connected . In that case, connect the AC
power adapter to the portable CD player and use it with a
household power supply. — Some portable CD players
cannot output light when the skip guard function (ESP, G-
PROTECTION, etc.) is turned on . In that case, turn off the
skip guard function .
z
You can hear the sound during recording. Connect
a headphone with a remote control to the i / LINK OUT jack. The
loudness of the sound you hear can be adjusted by turning VOL +,-
on the remote control ( pressing VOL +,-on the main unit). However,
the loudness of the recorded sound is not affected.
Basic
twenty three