Table of Contents
Advertisement
88
15.2 Additive Dispenser
CAUTION! In order to avoid injuries due to rotating parts on the powder outlet of the
additive dispenser, before carrying out any kind of operation on the additive dispenser, it
is imperative to make the automatic feeder currentless by turning the main switch to
„0/OFF" or by pulling the mains plug.
You can only connect one additive dispenser to the automatic feeder (either for powder or
for liquid additives). The automatic feeder is equipped as a standard with a cable with cubi-
cle plug for the additive dispenser.
For mounting or installation of the additive dispenser, refer to instructions manual
„Precision Doser for Powder Additives or Dosing Pump for Liquid Additives".
15.3 Fully Automatic Heat Exchanger Cleaning
The fully automatic heat exchanger cleaning facilitates fully automatic time- -controlled
cleaning with detergent (up to 2 times/day) of all milk- -supplying parts of the automatic calf
feeder except for the suction hoses. In this way, milk deposits or similar dirtying are
removed. Refer to chapter 12.3.3, page 74 „Cleaning, Cleaning Values Heat Exchanger".
Accessories
Advertisement
Table of Contents
