Table of Contents
Advertisement
78
Press Enter to start the cleaning process.
The cleaning sponge is pressed through the stainless steel coil
into the mixer jar by the incoming water. In order to complete
the cleaning process, press Enter to confirm "Sponge Clea-
ning, taken out ?".
As soon as afterrinsing has been completed, the following
message is displayed:
In order to increase the cleaning effect, dip the cleaning sponge into some cleansing
agent. In this case, you have to rinse with some clear water.
Procede as follows: Press Menu- -key and confirm with Enter.
Press Arrow Down: the display shows menu "Water HE,
start". Keep the Enter key pressed until some clear water co-
mes out of the water outlet of the mixer jar. Empty the mixer
jar (refer to above- -mentioned safety instructions) or drain off
the water via the mixer outlet valve. Check whether there is
some residual detergent in the mixer jar.
Functions of the Cleaning Key
Close the quick- -acting closure.
sponge cleaning
taken out?
sponge cleaning
finished
hand functions
water HE
start?
Advertisement
Table of Contents
