Danger Signs On The Automatic Calf Feeder; Information Signs On The Automatic Calf Feeder - Westfalia 7163-9001-044 Operating Instructions And Spare Parts List

1.2 Danger Signs on the Automatic Calf Feeder

1.3 Information Signs on the Automatic Calf Feeder

Introduction
CAUTION!
This sign warns you of rotating parts starting to work automatically.
This sign is located on potential danger areas such as the milk powder
hopper, the milk powder outlet, the mixer as well as the outlet for pow-
der additives on the additive dispenser.
In order to avoid injuries, before carrying out any kind of operation on
above listed parts, it is imperative to make the automatic feeder current-
less by turning the main switch to position „0/OFF" or by pulling the
mains plug.
CAUTION!
This sign warns you of electric shocks.
In order to avoid injuries, before opening the control unit, it is impera-
tive to make the automatic feeder currentless by turning the main switch
to position „0/OFF" or by pulling the mains plug.
Before connecting the automatic calf feeder to the mains supply and
activating the heating (see chapter 5 "Installing the Automatic Calf
Feeder", page 24), carefully read the operating instructions.
Any questions about this product? Then, feel free to get
in touch with us. Before calling us, please write down
the information (machine type, machine number) on
the nameplate located at the left of the feeder chassis,
as well as the program version (refer to chapter „Menu
1- - 99, Machine data").
Our address:
Förster- - Technik GmbH,
Gerwigstr. 25,
D- - 78234 Engen,
Tel. +49/(0)7733/9406- - 0,
Fax +49/(0)7733/9406- - 99
Internet: www.foerster- - technik.de
7