Entering The Figures - Westfalia 7163-9001-044 Operating Instructions And Spare Parts List

12.1 Entering the Figures

Press Arrow Up/Arrow Down and then ENTER in order to enter figures. In case of manual
activation of „Cleaning Mixer", in menu „Cleaning" you can enter the detergent amount
provided that you have previously selected the detergent pump in Setup (see following illu-
stration). In submenu „Settings" you can set the number of daily automatic mixer- -, HE- -
and air cleaning processes as well as the corresponding detergent- - and water amount for
pre- - and afterrinsing.
In order to access this submenu, press the Cleaning key located on the panel and subse-
quently Arrow Down.
Press ENTER to modify a figure. The displayed figure starts flashing (e.g. >20<). Arrow Up
is used to increase and Arrow Down to decrease the figure. The longer you keep the relevant
Arrow key pressed the faster the displayed figure is going to be modified. Once you set the
correct figure, press ENTER again to store it (the figure stops flashing). In case you do not
wish to modify the figure, press the Menu key to return to the main menu level.
Example for the input of figures within the functions of the Cleaning key:
cleaning mixer
start?
cleaning HE
start?
cleaning HE/hose
start?
air cleaning
start?
Functions of the Cleaning Key
detergent
>25<ml/l
detergent
>25<ml/l
detergent
25ml/l
69