Table of Contents
Advertisement
In addition, here you have to enter whether box 1 or box 2 are equipped with servo- - or gra-
dient control. Select „no" if you want to cancel or you do not want to register a box.
In case an additive dispenser is connected and additives should be dispensed, select the
Additive
additive dispenser in Setup.
dispenser
Do not modify the standard setting „no".
Calibration
scales
Heating system
Do not modify the standard setting „Heating system, thermostat".
This option indicates whether the automatic feeder has a thermostat for minimum operating
Min.oper.therm.
temperature.
Here you can enter whether the automatic feeder is equipped with a circulation pump.
Circulation
pump
Select „yes" in menu „air valve" when the automatic feeder is equipped with compressed air
Air valve
cleaning.
Enter „yes" in case the automatic feeder is equipped with a circulation valve that is needed
Circulation
for heat exchanger cleaning.
valve
In case the automatic feeder is equipped with a detergent pump and should the mixer be
Detergent pump
cleaned with detergent, you have to select the detergent pump in Setup.
Settings in Setup
33
Advertisement
Table of Contents
