Table of Contents
Advertisement
54
10.4 Calibration
10.4.1 Calibrating Water, Milk, MP
Calibration is defined as the input into the computer of the amount of water, milk and MP
distributed during a fixed period of time. Only enter the value corresponding to the amount
that has actually been distributed. The machine type determines which submenus are
displayed.
In case the feed components have not been calibrated at all or only inaccurately, the au-
tomatic feeder cannot prepare the exact feed mix in feeding mode. The manufacturer
does not accept any responsibility for errors due to inadequate calibration.
The calibration process of the feed components is always the same:
First press the „Menu" key and move to menu „Calibration" by means of Arrow Down.
Then press Enter to access the submenus. Hold an empty measuring vessel under the
discharge. Press Enter. The automatic feeder distributes the quantity of - - e.g. - - water that
has been calibrated. The set quantity is displayed on the screen. The displayed message
changes as soon as the water has been distributed. Now press Arrow Up/Arrow Down to
enter the amount dispensed and measured and confirm with Enter. The message
„Water start" is displayed again.
Repeat the calibration process, in order to be sure that the target quantity has been
attained.
Functions of the Menu Key
Advertisement
Table of Contents
