Table of Contents
Advertisement
Functions of the Cleaning Key
When the mixer is empty, the display shows:
In order to prepare the suction hoses to the cleaning process, proceed as follows:
Disconnect the suction hoses from the teat.
Disconnect the milk hose from the automatic feeder.
In case the milk hose should be cleaned too, disconnect it from the milk tank. Before,
close the stopcock of the milk tank.
Put the suction hoses onto the cleaning adaptor but do not connect them yet.
Should the milk hose be rinsed too, connect it to the quick coupler of the cleaning
adaptor.
As soon as the suction hoses are ready for cleaning, confirm
with ENTER in order to activate prerinsing.
Prerinsing
During prerinsing the milk is pressed through the coil by the incoming water and is subse-
quently drained off via the mixer jar, the box valves (box 1 and box 2 in turn) and the
connected hoses.
Before starting prerinsing, enter the amount of water (max. 10 liters) used for prerinsing, in
menu "Settings, HE/hose cleaning, Pre- -/afterrinsing".
After prerinsing has been completed, the automatic feeder
control invites you to connect the cleaning adaptor with the
hoses to the milk connection of the automatic calf feeder:
cleaning HE/hose
ready?
cleaning HE/hose
prerinsing
cleaning HE/hose
connected?
Milk connection
automatic feeder
(front at the lower right)
75
Advertisement
Table of Contents
