Standard Accessories; Optional Accessories (Sold Separately); Prior To Operation - Hitachi C 10FCH2 Handling Instructions Manual

STANDARD ACCESSORIES

(1) 255 m m TCT Saw blade (m ounted on tool) ............. 1
(2) Dust bag ...................................................................... 1
(3) 10 m m Box w rench .................................................... 1
(4) Vise Assem bly ............................................................ 1
(5) 4 m m Hex.bar w rench (only C10FCH2) .................... 1
(6) Sub Fence (B) ............................................................. 1
(7) Collar (A) (D30) ........................................................... 1
(8) Flat screw .................................................................... 1
(9) M 6 Nylon nut .............................................................. 1
(10) Plate (A) ..................................................................... 1
(11) Holder (B) .................................................................. 1
(12) Side handle ............................................................... 1
Standard accessories are subject to change without notice.

OPTIONAL ACCESSORIES (SOLD SEPARATELY)

(1) Extension Holder and Stopper
(2) Crow n m olding Vise Ass'y (Include Crow n m olding
Stopper (L))
(3) Crow n m olding Stopper (L)
(4) Crow n m olding Stopper (R)
Optional accessories are subject to change without notice.
APPLICATION
Cutting various types of alum inium sash and w ood.
UNPACKING
Carefully unpack the pow er tool and all related item s
(standard accessories).
Check carefully to m ake certain all related item s
(standard accessories) are present.

PRIOR TO OPERATION

1. Pow er source
Ensure that the pow er source to be utilized conform s
to the pow er requirem ents specified on the product
nam eplate.
Laser m arker (Only C10FCH2)
4
Gear case
Dust bag
Vise assem bly
Sub fence (B)
Fence (B)
2. Pow er sw itch
Ensure that the pow er sw itch is in the OFF position. If
the plug is connected to a receptacle w hile the trigger
sw itch is in the ON position, the pow er tool w ill start
operating im m ediately, inviting serious accident.
3. Extension cord
When the w ork area is rem oved from the pow er
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be kept
as short as practicable.
4. When the pow er tool is prepared for shipping, its
main parts are secured by a locking pin
M ove the handle slightly so that the locking pin can
be disengaged.
During transport, lock the locking pin into the gear
case (Fig. 1).
Handle
5. Attach the dust bag to the main unit (Fig. 2)
(1) When the dust bag has become full of sawdust, dust will
be blown out of the dust bag when the saw blade rotates.
Check the dust bag periodically and em pty it before it
becom es full.
M otor head
Handle
M otor
Saw blade
Low er guard
Rotation direction
Turn table
Fig. 2
Locking Pin
Fig. 1
Indicator (B) (For bevel scale)
Fence (A)
Table insert
Indicator (A) (For m iter scale)
Lever
Side handle