Table of Contents
Advertisement
7.
When cutting, hold the body of the metal cutter
firmly.
8.
While using the metal cutter, keep the tipped saw
blade, rotating parts and the saw dust exit aperture
away from the hands and face.
9.
When making a cut, do not try to pull the metal
cutter out of the cut while it is running. Turn off
the power switch first and wait until the blade
completely stops rotating before taking the metal
cutter out of the cut.
10. If the tipped saw does not seem to operate
normally or makes abnormal sounds, stop using
the tipped saw immediately and contact an
Authorized Hitachi Service Center for inspection
SPECIFICATIONS
Voltage
Power input
No-load speed
Max. cutting depth
Saw blade
Weight (without cord)
STANDARD ACCESSORIES
1 Carbide Tipped Saw Blade .................................... 1
(Mounted on the unit)
2 Box Wrench .............................................................. 1
3 Side Handle ............................................................... 1
4 Guide .......................................................................... 1
5 Eye Protection ........................................................... 1
1
The 1 tipped saw blade may not be included depending
on the prodact type and must be purchased separately.
Standard accessories are subject to change without notice.
4
11. If the metal cutter is accidentally dropped or
12. Make sure that material to be cut is firmly fixed
13. Keep flaminable and easily damaged objects away
14. Do not use the metal cutter to cut hard metal
15. Do not use cutting oil when cutting materials with
185 mm (external dia.) × 1.6 mm (thickness) × 20 mm (hole dia.)
OPTIONAL ACCESSORIES (sold separately)
2
Dimensions:
Outer
diameter
185 mm
3
4
5
Dimensions:
Outer
diameter
185 mm
Dimensions:
Outer
diameter
185 mm
and repair.
bumped, carefully examine the frame, tipped saw,
etc. to see that there are no cracks, deformation
or any other damage.
in place.
when cutting metal.
materials for long continuous periods of time.
the metal cutter.
110V
1140W
4300/min
62.5 mm
4.4 kg
1. Carbide tipped saw blade: Thin,
soft steel material cutting
Use: For cutting soft steel
materials.
Hole
Tip
diameter
width
20 mm
2 mm
2. Carbide tipped saw blade: Thin,
soft steel material cutting (Low
noise type)
Use: For cutting soft steel
materials.
Hole
Tip
diameter
width
20 mm
2 mm
3. Carbide tipped saw blade:
Aluminum sash material cutting.
Use: For cutting aluminum sash
materials.
Hole
Tip
diameter
width
20 mm
2 mm
Thickness of
Number
saw blade
of teeth
1.6 mm
48 teeth
Thickness of
Number
saw blade
of teeth
1.6 mm
48 teeth
Thickness of
Number
saw blade
of teeth
1.5 mm
60 teeth
Advertisement
Table of Contents
