JVC KY-F1030U Instructions Manual page 38

5. Menu screen settings (continued)
EXPOSURE screen (continued)
[ ] indicates the factory setting
Item
SHUTTER
SPEED
When
"STEP" is
selected
SPEED
When
"V.SCAN" is
selected
SPEED
When
"RANDON" is
selected
E34
Set Value
[STEP] Used to switch the shutter mode.
V.SCAN STEP:
RANDOM
EEI V. SCAN: The shutter speed can be changed with the
OFF
RANDOM: Used to synchronize the CCD accumulation
EEI:
OFF:
The shutter speed can be changed when SHUTTER is
4s
2s
set to "STEP", "V.SCAN" or "RANDOM".
1s
1/2s
1/4s
• When the shutter speed is slower than 1/7.5 s, the
[1/8s]
1/15s
1/30s
1/60s
1/125s
1/250s
1/500s
1/1000s
1/2000s
3.990s
•
[1/7.501s]
•
•
• There may be shortage of light when the shutter speed is
1/5906.836s
1/7.500s
•
[1/126.134s]
•
•
1/5648.193s
The shutter speed can be changed with the
[SPEED] item.
[SPEED] item.
Enables more detailed setting than [STEP].
timing with the Trigger input.
The shutter speed can be changed with the
[SPEED] item.
Used to automatically change the shutter
speed in accordance with the brightness of the
subject.
Fixed at 1/7.5 s.
MEMO
following phenomena may occur.
1) The screen update rate becomes longer in the case
of digital output.
2) The displayed image will appear intermittently in the
case of analog output.
3) Time will be required for the auto white, auto iris and
ALC operations.
If the shutter speed is set slower than 1 s, these
operations will behave as follows.
Auto white : Auto white balance function cannot be started.
( page E23 White balance adjustment)
Auto iris : Stops at the iris value at that time.
ALC : Stops at the sensitivity at that time.
To use a shutter speed slower than 1 s, use with the fol-
lowing settings selected:
IRIS MODE : MANUAL
GAIN : STEP or V.GAIN
increased. In this case, adjust the iris or sensitivity. Atten-
tion should be paid to the picture quality when the sensi-
tivity is raised since the image becomes coarse.
Contents