Menu Contents; Exposure Screen - JVC KY-F1030U Instructions Manual

Menu contents

1 : EXPOSURE: ................. Used for settings related to the video level, such as iris, shutter, sensitivity, etc.
2 : WHITE BALANCE: ........ Used to make settings for color temperature and white balance.
3 : PROCESS: .................... Used to make settings for detail compensation, gamma, master
4 : LENS : ........................... Sets the control method for the lens iris and lens focus, and zoom control method.
5 : SYSTEM SETTING: ...... Sets the screen display method and level of test pattern.

EXPOSURE screen

[ ] indicates the factory setting
Item
IRIS MODE
AE LEVEL
AE AREA
IRIS
LEVEL
black, flare compensation, Auto Black Level (ABL), etc.
Set Value
[AUTO] Switched in accordance with the used lens.
MANUAL AUTO:
MANUAL: • When using manual iris lens.
*When the auto-iris lens cable is not connected to the
[LENS] connector, the setting automatically becomes
"MANUAL".
-128 Used to adjust the video level when auto-iris, ALC and
-127 EEI are used,
: Increasing the value:
[NORMAL] Decreasing the value: Lowers the level
:
MEMO
126
"----" is displayed when auto-iris, ALC, and EEI are all set to
127
not operate.
Used to set the detection area for auto-iris. Switch
[FULL]
the setting in accordance with the conditions of use.
SQUARE
SPOT
FULL
Detection
area
0
Used to set the iris level when the IRIS MODE is set to
1
"MANUAL".
•
Increasing the value:
[128]
Decreasing the value: Closes the iris
•
254
255
Contents
When using auto-iris lens.
• Lens not mounted
• When using manual iris while auto-iris lens
is mounted.
Raises the level
SQUARE SPOT
Detection
area
Detection area
Opens the iris
MEMO
During selection of
the detection area,
the detection area is
s h o w n o n t h e
screen connected to
the analog output.
E33