Setup; Power Supply; Setting A Music Rest - Roland E-X50 Owner's Manual

Setup

This section contains information about setting up your instrument and preparing to play. Please go through this
section carefully before turning the power on.

Power Supply

You can power the instrument by using the included power adaptor.
Turn down the volume of instrument and the connected audio equipment before you switch the instrument on.
1.
Connect the adaptor to the DC 12V jack of this instrument.
2.
Plug the adaptor into an
3.
Press the [POWER] switch, the LCD screen turns on, which
indicates the instrument is powered on.
4.
If you are ready to turn off the instrument, press and hold the
[POWER] switch again.
Notes:
1. The power to this unit will be turned off automatically after a predetermined amount of time has passed since it was
last used for playing music, or its buttons or controls were operated (Auto Off function).
If you do not want the power to be turned off automatically, disengage the Auto Off function (P.33).
• Unsaved data is lost when the power turns off. Before turning the power off, save the data that you want to keep.
• To restore power, turn the power on again.
2. For your safety, please unplug the instrument when it is not in use or during a thunderstorm.

Setting a Music Rest

A music rest is supplied with the instrument. You can easily attach it by
inserting it into the slots at the rear of the panel.
AC outlet.
- 9 -