Scale Tune - Roland E-X50 Owner's Manual

3.
Press the [ENTER] button to move the cursor to "OFF" in the lower menu. Now use the data dial or the [EXIT] + [<] /
[>] buttons to turn this function on or off. Please refer to the function menu (P.33).

Scale Tune

There are two modes: "SCALE TUNE" and "AUDIO PAD". Scale Tune mode is turned on by default.
You can press the [AUDIO PAD / SCALE TUNE] button to switch between the Scale Tune mode and the Audio Pad
mode (only when a USB flash drive is connected). When you switch to
display "Scale".
1.
Scale Tune buttons are [C], [C#], [D], [D#], [E], [F], [F#], [G],
[G#], [A], [A#] and [B].
In Scale Tune mode, press one of the Scale Tune buttons to
turn the selected scale on or off.
When a scale is turned on, the corresponding button LED will
turn on. The related pitch will decrease by 1/2 semitone. When
switched off, the corresponding button LED will turn off. The
related pitch will return to normal.
2.
Reset the scale
Press the [SCALE RESET] button. All the Scale Tune button
LEDs will turn off, and go back to normal pitch.
3.
Scale fine tune
Press and hold one of the Scale Tune buttons to enter edit
mode. Use the data dial or the [EXIT] + [<] / [>] buttons to edit
the selected scale.
For example, press and hold [C#], the LCD displays "SCALE: C#,-50". Use the data dial to adjust the value, from -50 to
50.m If there's no operation, it will go back automatically from the editing display.
4.
Store a scale
Press and hold the [SCALE TUNE] button, then press one of the Scale Tune buttons to save the scale settings to that
button.
5.
Recall a scale
Press and hold the [RECALL] button, then press one of the Scale Tune buttons to recall the scale settings saved in
that button.
Scale Tune mode, the LCD will temporarily
- 27 -