Function Menu - Roland E-X50 Owner's Manual

menu.
3.
Press the [ENTER] button to format the USB flash drive, or press the [EXIT] button to cancel.
4.
After formatting, it will return to the USB menu.
Note:
Formatting will delete all data on the USB flash drive. It may take several minutes to format a USB flash drive of large
capacity.

Function Menu

1.
Press the [MENU] button to enter the function menu.
2.
Use the [<] / [>] button to select a parameter category. After a
second, the LCD automatically shows the parameter.
3.
Use the data dial to select a parameter. Then press the [ENTER]
button to move the cursor to the lower menu to set the parameter.
4.
Use the data dial or the [EXIT] + [<] / [>] buttons to change the
setting.
Press [EXIT] + [<] + [>] buttons simultaneously to restore the
default setting of the current parameter.
5.
Press the [EXIT] button to go back.
6.
Press the [STYLE] or [TONE] button to exit the function menu.
Detailed parameters and their ranges:
Parameter
Parameter
category
Music volume
Upper tone volume
Dual tone volume
Split tone volume
Metronome volume
Mic volume
Percussion volume
MIXER
Drum volume
Bass volume
Accomp 1 volume
Accomp 2 volume
Accomp 3 volume
Accomp 4 volume
Accomp 5 volume
TUNING Tune
LCD
Range
display
MusicVl 0 ~ 32 (default: 26)
Upper1 0 ~ 32 (default: 25)
Upper2 0 ~ 32 (default: 20)
Lower 0 ~ 32 (default: 18)
MetroVl 0 ~ 32 (default: 25)
Mic Vol 0 ~ 32 (default: 12)
Perc 0 ~ 32
Drum 0 ~ 32
Bass 0 ~ 32
Accomp1 0 ~ 32
Accomp2 0 ~ 32
Accomp3 0 ~ 32
Accomp4 0 ~ 32
Accomp5 0 ~ 32
Tune -50 ~ +50 (default: 0)
- 33 -
Description
You can separately adjust the
volume of each track to keep an
appropriate volume balance.
Adjust the pitch of the keyboard