One Touch Setting - Roland E-X50 Owner's Manual

that button.
3.
Parameters that can be saved to registration memory include:
Tone: main tone, dual tone, split tone, DSP effects, mixer settings.
Accompaniment: style, tempo, Chord mode.
Function: touch response, mic effect and some parameters
Recalling the Registered Settings
Press one of the memory buttons [1] - [4]. It will recall the settings
saved in that button. This will reset related parameters on the control panel.
Notes:
1. Registration memory cannot be recalled when the O.T.S. function is in use.
2. When power off, you can press and hold the [EXIT] and [ENTER] buttons and turn on the power. LCD display
shows "Reset OK" and the registration memory will be reset to factory default setting.

One Touch Setting

When one touch setting function is in use, you can instantly recall the related tone settings to match the current style
with a single touch of a button.
1.
Press the [O.T.S.] button. The button LED turns off and
the "O.T.S." icon on LCD lights up. When chord mode is
off, the A.B.C. function is turned on automatically. If the
WHOLE mode is selected, it will stay in WHOLE mode
when O.T.S. is turned on.
2.
Press one of the O.T.S. buttons [1]–[4]. It will recall the
tone and effect setting that match the selected style.
One Touch Setting parameters include:
Main tone (Volume, Reverb Level, Octave)
Dual tone (Volume, Reverb Level, Octave)
Split tone (Volume, Reverb Level, Octave)
3.
Press the [O.T.S.] button again to turn off this
button LED and the "MEMORY" icon on LCD lights up.
Note:
Registration Memory is not available
function. It will automatically switch to the registration memory. The
when O.T.S. is in use.
- 22 -
in the function menu.