Audio Pad - Roland E-X50 Owner's Manual

Audio Pad

When a USB flash drive is connected and recognized, you can press the [AUDIO PAD / SCALE TUNE] button to
switch to Audio Pad mode. The button LED lights up
1.
Audio Pad buttons are [C], [C#], [D], [D#], [E], [F], [F#], [G], [G#],
[A], [A#] and [B].
When the audio files on USB flash drive are recognized, the
corresponding button LED will turn on. Press one of the lit buttons
to play back the corresponding MP3/WAV file. During playback,
the selected button LED will blink. Press the corresponding button
again to stop the audio playing back.
2.
Audio Pad file names
Audio Pad files on USB flash drive should be named as below:
"File name 1" to "File name 4" can be recognized, but "FILE NAME 1" has priority.
Button File name 1
[C] PAD_C.wav
[C#] PAD_C#.wav
[D] PAD_D.wav
[D#] PAD_D#.wav
[E] PAD_E.wav
[F] PAD_F.wav
[F#] PAD_F#.wav
[G] PAD_G.wav
[G#] PAD_G#.wav
[A] PAD_A.wav
[A#] PAD_A#.wav
[B] PAD_B.wav
3.
Audio Pad playback mode
You can set the playback mode for each audio pad button.
Press and hold one of the Audio Pad buttons to enter edit
mode. Then use the data dial or the [EXIT] + [<] / [>] buttons to
select "One Shot" mode or "Loop" mode.
Audio files that can be played
Format
MP3
Sampling Frequency
Bit Rate
WAV Sampling Frequency
and the LCD will temporarily display "AudioPad".
File name 2
PAD_1.wav
PAD_2.wav
PAD_3.wav
PAD_4.wav
PAD_5.wav
PAD_6.wav
PAD_7.wav
PAD_8.wav
PAD_9.wav
PAD_10.wav
PAD_11.wav
PAD_12.wav
:
MPEG-1 audio layer 3
44.1kHz
32, 40, 48, 56, 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 kbps,
VBR (Variable Bit Rate)
22KHz, 44.1KHz, 48KHz
File name 3
PAD_C.mp3
PAD_C#.mp3
PAD_D.mp3
PAD_D#.m03
PAD_E.mp3
PAD_F.mp3
PAD_F#.mp3
PAD_G.mp3
PAD_G#.mp3
PAD_A.mp3
PAD_A#.mp3
PAD_B.mp3
- 28 -
File name 4
PAD_1.mp3
PAD_2.mp3
PAD_3.mp3
PAD_4.mp3
PAD_5.mp3
PAD_6.mp3
PAD_7.mp3
PAD_8.mp3
PAD_9.mp3
PAD_10.mp3
PAD_11.mp3
PAD_12.mp3