Selecting And Playing Tones (Model Bank); Selecting A Tone; Playing The Model Bank Tones (Single Setup); Selecting Tones From A Model Bank - Roland JUPITER-X Owner's Manual

Selecting and Playing Tones

Selecting a Tone

In MODEL BANK mode, you can change the model or tone, or select
tones from models registered in a model bank
* You can also select using tone categories.
Playing the MODEL BANK Tones
When SINGLE SETUP is executed, only part 1 is enabled, and you can
perform with the tones of only one model.
1.
Hold down the [SHIFT] button
button.
A confirmation message for executing SINGLE SETUP is shown.
2.
Press the [ENTER] button
* You can also execute SINGLE SETUP from the MENU screen ([MENU]–
[EDIT]–[SINGLE SETUP]).
3.
Press the [MODEL BANK]
4.
Use the [1]–[16] buttons
use the [2] knob to select a tone.
Useful functions for selecting tones on the MODEL BANK
screen
5 Press the
[ENTER] button to select a tone from the tone list screen.
5 Press the
[ENTER] button to confirm.
5 Press the
[EXIT] button to return to the tone you were using before the tone list
screen was displayed.
5 Press the PAGE [ ä ] button to move the cursor up.
5 You can use the
[2] knob to select a model or category.
5 Press the PAGE [ å ] button
to go back to selecting a tone.
* When SINGLE SETUP is executed, the scene data you were editing is lost.
Save the data if you want to keep it before executing SINGLE SETUP.
&
"Saving a Scene" (p. 13)
* The parameters that work with the controllers on this instrument differ
with each model. Refer to "Correspondence Between Controllers and
Parameters" in the "Reference Manual"
* The SINGLE SETUP state is canceled when you switch scenes.
* You can also execute SINGLE SETUP from the MENU screen ([MENU]–
[SINGLE SETUP]).

Selecting Tones from a Model Bank

1.
Press the [MODEL BANK]
You switch to tone select mode.
2.
Press a [1]–[16] button
Now you can select tones of the model that is registered in the
model bank.
3.
Use the [2] knob to select a tone.
You can use the [1] knob to move rapidly.
MEMO
The models registered in the model banks can be assigned freely.
1.
Hold down the [MODEL BANK] button
([1]–[16]) that you want to assign.
2.
Press the PAGE buttons to move the cursor to "Attr".
3.
Select whether to assign MODEL, CATEGORY or USER.
4.
Move the cursor to "Mdl**"
(category name) to make the assignment.
* Up to eight models or categories can be assigned to a button.
* You can't assign both models and categories to a button simultaneously.
14
([1]–[16] buttons).
(SINGLE SETUP)
and press the [MODEL BANK]
to execute SINGLE SETUP.
button.
to select a model/category, and
for details.
button.
to select a model bank.
and press the button
and select the model name
(MODEL BANK)
5.
If you want to save the setting, execute the System Write
operation.
&
"Saving the System Settings (System Write)"
Changing the Model or Tone from the Top
Screen
1.
Press the [PART] button
then press a [1]–[5] button
change.
2.
Press the [MODEL BANK]
The MODEL BANK top screen appears.
3.
Press the PAGE [ ] button
category name.
4.
Use the [2] knob to select a model/category.
5.
Press the PAGE [ ] button
number.
6.
Use the [2] knob to select a tone.
You can use the [1] knob to move rapidly.
(p. 27)
to switch to part select mode, and
to select a part that you want to
button.
to move the cursor to the model/
to move the cursor to the tone