Roland E-X50 Owner's Manual page 34

Upper tone octave
Dual tone octave
Split tone octave
Touch response
Split point
Pedal function
KEYBOARD
Sustain type
Accomp volume
One finger key
ACCOMP
Fade time
Reverb type
EFFECT
Reverb level
Upper tone reverb
level
Dual tone reverb level
Split tone reverb level
EQ
OctvR1 -2 ~ +2 (default: 0)
OctvR2 -2 ~ +2 (default: 0)
OctvL -2 ~ +2 (default: 1)
Touch OFF,1 ~ 3 (default: 2)
SplitPt 1 ~ 61 (default: 19)
Pedal Sustain
Soft
Memory
Sta/Stp
(default: Sustain)
Ped Rel ON,OFF (default: OFF)
AcmpVol 0 ~ 32 (default: 26)
OneFKey OFF,C,C#,D,D#,E,F,F#,
G,G#,A,A#,B (default:
OFF)
FdTime 1 ~ 20 (default: 10)
RevType Hall 1
Hall 2
Hall 3
Hall 4
PnoHall
Room 1
Room 2
Room 3
Church
Garage
RevStdH
(default: RevStdH)
Rev Lv 0 ~ 32 (default: 28)
RevLvR1 0 ~ 32 (default: 9)
RevLvR2 0 ~ 32 (default: 9)
RevLvL 0 ~ 32 (default: 9)
EQ Piano
Pop
- 34 -
up or down in a 2-cent
increment.
Shift the pitch of the specified
tone layer up or down by one
octave.
Set the velocity response of the
keyboard.
Set the split point for Split mode
and Chord mode.
Assign different functions to the
footswitch.
Set the sustain type so that it will
produce different sustain effect.
Adjust the accompaniment
volume.
Set the root note of one finger
key function.
Set the fade in/out time.
Select the reverb type.
Adjust the reverb level of the
current reverb type.
Adjust the reverb level of the
upper tone.
Adjust the reverb level of the
dual tone.
Adjust the reverb level of the
split tone.
Select the EQ type.