Table of Contents
Advertisement
Owner's Manual
7. Connecting to audio equipment
Read this chapter if you wish to connect the ep-97/77
to an audio device. Connecting the ep-97/77 to an
audio device allows you to use an external amplifier
or to record your performance onto cassette, MD or
other recording media.
About the audio jacks
Pedal
Output
==
Damper
Soft
R
urpu
{8
L
Mano
Stereo
i,
Mono
" i
-— Stereo =
Output Jacks—Use audio cables (sold separately) to
connect the ep-97/77 to an amplifier, a mixing con-
sole, your HiFi amp, etc. If you wish to record your
performance, connect the Output jacks of your ep-97/
77 to the inputs of the accessed deck, MD recorder,
etc.
Input Jacks—You can use audio cables (sold separate-
ly) to connect another audio producing device to the
ep-97/77, and hear its sound through the speakers of
the ep-97/77.
Making the connections
16
Note: To prevent malfunction and/or damage to speakers
or other devices, always turn down the volume, and turn
off the power on all devices before making any connections.
1. Turn the volume down completely on all equip-
ment.
2. Turn off the ep-97/77 and any other devices to be
connected.
3. Use audio cables (sold separately) to connect the
other device to the ep-97/77.
Note: If the device you are connecting is monaural, con-
nect it to the L (Mono) jack, In this case, connect nothing
to the R jack of the ep-97/77.
Use a cable from Roland to make the connection. For
cable makes, please note the following: Some connec-
tion cables contain resistors. Do not use them. They
can cause the sound level to be extremely low, or
impossible to hear. For information on cable specifi-
cations, contact the manufacturer of the cable.
Once the connections have been completed, turn on
power to your various devices in the order specified
below. By turning on devices in the wrong order, you
risk causing malfunction and/or damage to speakers
and other devices.
Note: When connecting the ep-97/77 to an external
amplifier, be sure to set the [Volume] control no higher
than 3/4 ("3 o'clock").
Using an external amplifier or recording
your music with an audio device
Input R/L
(Line In, Aux in)
1. Turn on the power to the ep-97/77.
2. Turn on the power to the connected equipment.
3. Adjust the volume.
Recording procedure
1. Connect the ep-97/77 and the audio device.
2. Start recording on the connected audio device.
3. Begin plaving on the ep-97/77.
4. When you finish playing, stop recording.
Listening to the sound of an audio device
through the speakers of the ep-97/77
Output R/L
(Line Out)
Podat
neni
FI
Soh
R
a:
1. Turn on the power to the connected equipment.
2. Turn on the power to the ep-97/77.
3. Adjust the volume.
Advertisement
Table of Contents
