Maintenance And Storage - Jimmy BX7 Pro User Manual

Maintenance and Storage

12
Please clean dust cup and filter after each use for
further use. It is recommended to replace a filter
after 30-50 hours of working time(depending on
Dust sensor cover
specific situation) for better use.
Any paper, lead glass, plastic will greatly affect
the effect of UV light. Please wipe and clean the UV tube regularly for better use.
Do Not touch the UV tube as dirt will affect UV light effect.
Put the machine in cool and dry place if the machine is to be idled. Do Not leave it in direct
sunlight or humid environment.
The dust sensor cover in the air duct need to be cleaned regularly to avoid affecting the
transmission and reception of infrared signals .(Figure 12)
Cautions
Please read this instruction manual carefully before use and keep it properly for future use.
Never leave the machine working without supervision.
Please turn off the power switch and unplug the power cord if the machine is to be idled. Do Not
unplug the power cord with humid hand in case of electric shock.
Cut the power source in maintenance or off-service.
Keep the power cord away from sharp objects and do not drag the cord to move the machine in
case of cord damage.
For safety reasons, please do not use the product to clean hot objects such as carbon,
cigarette butts, sharp objects such as broken glass, corrosive liquids, flammable and explosive
materials such as gasoline and alcohol. Otherwise it may cause product damage or fire.
Do not use this product to clean water or wet dust. Do Not operate it in humid places (such as
bathroom, toilet, laundry room, etc.) to avoid malfunction.
Do Not place the machine near heating appliances or expose it to direct sunlight in case of fire
hazard.
Keep this product beyond the reach of special individual such as children without adult
supervision.
Do Not operate this machine with suction port blocked in case of product damage.
5