Table of Contents
Advertisement
On-board help
Tap (1) and select machine material. The corresponding linear thermal expansion appears.
Enter the three values [2] required to calculate the thermal growth value for the selected feet
pair using the onscreen keyboard [3]. The three values are:
Ambient temperature (initial temperature)
l
Machine running temperature (final temperature)
l
Distance from machine base (or shimming plane) to the shaft centerline (length)
l
With thermal growth values enabled [4], the corresponding machine within the mini train inset
at the top-right corner appears in orange [5].
Tap
to simultaneously display the calculated thermal growth value for the respective
feet pair [6] and toggle to the next feet pair [7].
Tap
to return to the thermal growth screen showing the calculated values.
Multiple feet
The item "Multiple feet" is primarily used to determine foot corrections in a multiple feet
machine, and is therefore accessible also in the result screen.
The dimension between the feet may be defined in the 'Multiple feet' screen which is accessed
by tapping the item "Multiple feet".
38
Version:2.3
Advertisement
Table of Contents
