Charging The Battery - Fluke db PRUFTECHNIK SHAFTALIGN touch Manual

On-board help
The rugged device's multipurpose connector (11) is used for charging the device and con-
necting it to a PC. When connected to a PC, data may be transferred from the tablet or a
device firmware update may be performed.

Charging the battery

Charge the battery before using the rugged device for the first time or when the tablet has
been unused for extended periods.
Use only the supplied charger and corresponding USB C to USB A cable.
Connect the standard USB A end (1) to the supplied USB charger.
l
Plug the USB C end (2) to the rugged device's multipurpose connector.
l
Connect the USB charger to mains supply.
l
After fully charging, disconnect the charger from the rugged device, and then unplug the
l
charger from the mains supply.
The charge capacity is shown by the power icon (1) on the top right corner of the dis-
play.
12 Version:2.3