Opening An Asset Measurement Assigned To An Rfid Tag - Fluke db PRUFTECHNIK SHAFTALIGN touch Manual

As soon as data has been written on the RFID tag, the corresponding hint appears on the dis-
play.
Tap to exit the screen.
Note
If however, data had already been assigned to the RFID tag, a hint requesting over-
writing of the data appears.
Opening an asset measurement assigned to an RFID tag
From the home screen, tap
Position the rugged device such that its built-in NFC antenna is as close to the RFID tag as pos-
sible (less than a centimeter).
SHAFTALIGN touch
the "RFID" icon.
On-board help
27