Installation; Introduction To Installation And Commissioning - ABB IRB-M100 Product Specification

1.3 Installation

1.3.1 Introduction to installation and commissioning

General
This chapter contains assembly instructions and information for installing the
IRB-M100 controller at the working site.
The installation must be done by qualified installation personnel in accordance
with the safety requirements set forth in the applicable national and regional
standards and regulations.
Safety information
Before any installation work is commenced, it is extremely important that all safety
information is observed.
There are general safety aspects that must be read through, as well as more specific
safety information that describes the danger and safety risks when performing the
procedures.
Product specification - IRB-M100
3HKA00000184276-001 Revision: A
1.3.1 Introduction to installation and commissioning
© Copyright 2021 ABB. All rights reserved.
1 Description
21