Advertisement
3. Install the handle assembly to the machine using 2
bolts and 2 nuts as shown in
Figure 4
1. Handle assembly
2. Bolt
4. Install the fuel tank and secure the cushion; refer to the
Operator's Manual for the machine.
Figure
4.
3. Nut
4
Routing the Cables
Parts needed for this procedure:
3
Cable tie
Procedure
1. Route the cables across the machine, in front of the
fuel tank
(Figure
Engine not shown
1. Fuel tank
2. Route the cables through the engine plate and across
the mower deck as shown in
Engine not shown in callout bubble
1. Engine plate
4
5).
Figure 5
2. Cable
Figure
6.
Figure 6
2. Mower deck
Advertisement
