Advertisement
Weight Kit
GrandStand
Model No. 133-1428
This product contains a chemical or chemicals known to the State of California to
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Weight
Spacer
Washer
Bolt (3/8 x 2-3/4 inch)
Bolt (3/8 x 4 inch)
Bolt (3/8 x 5 inch)
Bolt (3/8 x 6 inch)
Nut
Preparing the Machine
© 2016—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
®
Mower
WARNING
CALIFORNIA
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
Qty.
1
4
4
2
2
2
2
4
Register at www.Toro.com.
Install the weights.
Figure 1
Original Instructions (EN)
Form No. 3403-317 Rev A
Installation Instructions
Use
All Rights Reserved *3403-317* A
Printed in the USA
Advertisement
Table of Contents
Related Manuals for Toro GrandStand 133-1428
Summary of Contents for Toro GrandStand 133-1428
- Page 1 Bolt (3/8 x 4 inch) Bolt (3/8 x 5 inch) Bolt (3/8 x 6 inch) Preparing the Machine Figure 1 © 2016—The Toro® Company Register at www.Toro.com. Original Instructions (EN) All Rights Reserved *3403-317* A 8111 Lyndale Avenue South Printed in the USA...
- Page 2 Installing the Weights This kit includes 1 weight, but you can add additional weights (sold separately) using the longer bolts. Use this table to determine which size bolts to use. Number of weights Top bolt size 3/8 x 4 inch 3/8 x 5 inch 3/8 x 6 inch Figure 2...
Need help?
Do you have a question about the GrandStand 133-1428 and is the answer not in the manual?
Questions and answers